OEM/ODM China Danfoss Omt - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng
OEM/ODM China Danfoss Omt - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng Detail:
Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !
Application
Rexroth A6V/A7V series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.
Product Information
ITEM |
DESCRIPTION |
QUANTITY |
ITEM |
DESCRIPTION |
QUANTITY |
1 |
DRIVE SHAFT |
1 |
9 |
VALVE PLATE |
1 |
2 |
PISTON |
7 |
|
|
|
3 |
HALF RING |
2 |
|
|
|
4 |
CENTER PIN |
1 |
|
|
|
5 |
SET PLATE |
1 |
|
|
|
6 |
SOCKET BOLT |
14 |
|
|
|
7 |
DISC SPRING |
4 |
|
|
|
8 |
CYLINDER BLOCK |
|
|
|
Safety Information
The pump A7VO was designed for operation in open loop circuits
Systems design, installation and commissioning requires trained technicians or tradesmen.
All hydraulic ports can only be used for the fastening of hydraulic service lines.
During and shortly after operation of a pump the housing and especially a solenoid can be extremely hot, avoid being burned; take suitable safety measures (wear protective clothing).
Dependent on the operating conditions of the axial piston pump (operating pressure, fluid temperature) deviations in the perfor- mance curves can occur.
Pressure ports:
All materials and port threads are selected and designed in such a manner, that they can withstand the peak pressures.
The machine and system manufacturer must ensure, that all connecting elements and hydraulic lines are suitable for the actual operating conditions (pressures, flow, fluid, temperature) in accordance with the necessary safety factors.
All given data and information must be adhered to..
The product has not been released as a component in the safety concept of a total machine system acc. to DIN EN ISO 13849.
The following tightening torques are valid:
Female threads in the axial piston unit:
the maximum permissible tightening torques MGMax are maximum values for the female threads in the pump casting and may not be exceeded. For values see table below. -
Fittings:
please comply with the manufacturer‘s information regarding the max. permissible tightening torques for the used fittings.
Fastening bolts:
for fastening bolts to DIN 13 we recommend to check the permissible tightening torques in each individual case to VDI 2230.
Plugs:
for the metal plugs, supplied with the axial piston unit the following min. required tightening torques MV apply (see table)
Port thread size |
Max. perm. tightening torque in female threads MG max |
Required tightening torque of plugs or fittings MV |
Across the flats in Allan screws |
|
M14x1.5 |
DIN 3852 |
80 Nm |
35 Nm |
6 mm |
M18x1.5 |
DIN 3852 |
140 Nm |
60 Nm |
8 mm |
M22x1.5 |
DIN 3852 |
210 Nm |
80 Nm |
10 mm |
M33x2 |
DIN 3852 |
540 Nm |
225 Nm |
17 mm |
About Tansportation
Cooperation Partners
Contact us
Peter
Sales Manager
Mobile Phone
+86 15698162885
sales@rfhydraulics.com
+86 15698162885
Product detail pictures:
Related Product Guide:
Our purpose would be to offer good quality products at competitive price ranges, and top-notch support to clients around the whole world. We're ISO9001, CE, and GS certified and strictly adhere to their good quality specifications for OEM/ODM China Danfoss Omt - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng , The product will supply to all over the world, such as: Slovenia, Thailand, UK, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Julie from Cologne - 2018.09.29 13:24
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Ella from moldova - 2018.06.12 16:22