Manufacturer for Kawasaki Pump Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng
Manufacturer for Kawasaki Pump Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng Detail:
Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !
Application
Rexroth A4VG series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.
Product Information
|
ITEM |
DESCRIPTION |
QUANTITY |
ITEM |
DESCRIPTION |
QUANTITY |
|
1 |
VALVE PLATE L |
1 |
8 |
SADDLE BEARING |
2 |
|
VALVE PLATE R |
1 |
9 |
BEARING SEAT |
2 |
|
|
2 |
CYLINDER BLOCK |
1 |
10 |
DRIVE SHAFT |
1 |
|
3 |
RETAINER WASHER |
1 |
11 |
CHARGE PUMP |
|
|
4 |
BALL GUIDE |
1 |
|
|
|
|
5 |
PISTON SHOE |
9 |
|
|
|
|
6 |
RETAINER PLATE |
1 |
|
|
|
|
7 |
SWASH PLATE |
1 |
|
|
General Instructions
The pump A4VG is designed to be used in closed circuit.
The project planning, installation and commissioning of the axial piston unit requires the involvement of qualified person- nel.
Before using the axial piston unit, please read the corre- sponding instruction manual completely and thoroughly. If necessary, these can be requested from Bosch Rexroth.
During and shortly after operation, there is a risk of burns on the axial piston unit and especially on the solenoids. Take appropriate safety measures (e. g. by wearing protective clothing).
Depending on the operating conditions of the axial piston unit (operating pressure, fluid temperature), the characteris- tic may shift.
Service line ports:
The ports and fastening threads are designed for the speci- fied maximum pressure. The machine or system manufac- turer must ensure that the connecting elements and lines correspond to the specified application conditions (pres- sure, flow, hydraulic fluid, temperature) with the necessary safety factors.
The service line ports and function ports can only be used to accommodate hydraulic lines.
The data and notes contained herein must be adhered to.
The product is not approved as a component for the safety concept of a general machine according to ISO 13849.
The following tightening torques apply:
Fittings:
Observe the manufacturer’s instructions regarding the tightening torques of the fittings used.
Mounting bolts:
For mounting bolts with metric ISO thread according to DIN 13 or thread according to ASME B1.1, we recommend checking the tightening torque in individual cases in accor- dance with VDI 2230.
Female threads in the axial piston unit:
The maximum permissible tightening torques MG max are maximum values of the female threads and must not be exceeded. For values, see the following table.
Threaded plugs:
For the metallic threaded plugs supplied with the axial pis- ton unit, the required tightening torques of threaded plugs MV apply. For values, see the following table.
| PortsStandard Size of thread | Maximum permissible tightening torque of the female threads MG max | Requiredtightening torque of the threaded plugs M 1)
V |
WAFhexagon socket of the threaded plugs | |
| DIN 3852 | M10 x 1 | 30 Nm | 15 Nm2) | 5 mm |
| M12 x 1.5 | 50 Nm | 25 Nm2) | 6 mm | |
| M14 x 1.5 | 80 Nm | 35 Nm | 6 mm | |
| M16 x 1.5 | 100 Nm | 50 Nm | 8 mm | |
| M18 x 1.5 | 140 Nm | 60 Nm | 8 mm | |
| M22 x 1.5 | 210 Nm | 80 Nm | 10 mm | |
| M26 x 1.5 | 230 Nm | 120 Nm | 12 mm | |
| M33 x 2 | 540 Nm | 225 Nm | 17 mm | |
| M42 x 2 | 720 Nm | 360 Nm | 22 mm | |
| M48 x 2 | 900 Nm | 400 Nm | 24 mm | |
1) The tightening torques apply for screws in the “dry” state as received on delivery and in the “lightly oiled” state for installation.
2) In the “lightly oiled” state, the MV is reduced to 10 Nm for M10 x 1 and 17 Nm for M12 x 1.5.
About Tansportation
Cooperation Partners
Contact us
Peter
Sales Manager
Mobile Phone
+86 15698162885
sales@rfhydraulics.com
+86 15698162885
Product detail pictures:
Related Product Guide:
Innovation, good quality and reliability are the core values of our enterprise. These principles today extra than ever form the basis of our success as an internationally active mid-size organization for Manufacturer for Kawasaki Pump Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng , The product will supply to all over the world, such as: Uzbekistan, Islamabad, New Delhi, Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We are able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and products. For anyone who is interested in our company and items, please make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are going to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please really feel no cost to speak to us for enterprise. nd we believe we are going to share the most effective trading practical experience with all our merchants.
By Sabrina from Malaysia - 2018.12.30 10:21
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By mary rash from Puerto Rico - 2018.06.18 17:25
Products categories
-
2019 New Style Hydraulic Axial Piston Pump - P...
-
Hot-selling Hydraulic Cylinder Piston Rod ̵...
-
Factory Cheap Hot Rexroth A10vso - Rexroth Hyd...
-
Professional China Concrete Pump Parts - Rexro...
-
Wholesale Price Hydraulic Piston - Rexroth Hyd...
-
Chinese Professional Rexroth Hydraulic Spare Pa...