Hot sale Rexroth A4vg71-1/2 - Rexroth Hydraulic Pump Parts A7VO Series Displacement 28~500 – RunFeng
Hot sale Rexroth A4vg71-1/2 - Rexroth Hydraulic Pump Parts A7VO Series Displacement 28~500 – RunFeng Detail:
Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !
Application
Rexroth A7VO series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.
Product Information
ITEM |
DESCRIPTION |
QUANTITY |
ITEM |
DESCRIPTION |
QUANTITY |
1 |
DRIVE SHAFT |
1 |
|
|
|
2 |
CENTER PIN |
1 |
|
|
|
3 |
SET PLATE |
1 |
|
|
|
4 |
PISTON |
7 |
|
|
|
5 |
RING OF PISTON |
14 |
|
|
|
6 |
SOCKET BOLT |
14 |
|
|
|
7 |
CYLINDER BLOCK |
1 |
|
|
|
8 |
VALVE PLATE |
1 |
|
|
Safety Information
The pump A7VO was designed for operation in open loop circuits
Systems design, installation and commissioning requires trained technicians or tradesmen.
All hydraulic ports can only be used for the fastening of hydraulic service lines.
During and shortly after operation of a pump the housing and especially a solenoid can be extremely hot, avoid being burned; take suitable safety measures (wear protective clothing).
Dependent on the operating conditions of the axial piston pump (operating pressure, fluid temperature) deviations in the perfor- mance curves can occur.
Pressure ports:
All materials and port threads are selected and designed in such a manner, that they can withstand the peak pressures.
The machine and system manufacturer must ensure, that all connecting elements and hydraulic lines are suitable for the actual operating conditions (pressures, flow, fluid, temperature) in accordance with the necessary safety factors.
All given data and information must be adhered to..
The product has not been released as a component in the safety concept of a total machine system acc. to DIN EN ISO 13849.
The following tightening torques are valid:
Female threads in the axial piston unit:
the maximum permissible tightening torques MGMax are maximum values for the female threads in the pump casting and may not be exceeded. For values see table below. -
Fittings:
please comply with the manufacturer‘s information regarding the max. permissible tightening torques for the used fittings.
Fastening bolts:
for fastening bolts to DIN 13 we recommend to check the permissible tightening torques in each individual case to VDI 2230.
Plugs:
for the metal plugs, supplied with the axial piston unit the following min. required tightening torques MV apply (see table)
Port thread size |
Max. perm. tightening torque in female threads MG max |
Required tightening torque of plugs or fittings MV |
Across the flats in Allan screws |
|
M14x1.5 |
DIN 3852 |
80 Nm |
35 Nm |
6 mm |
M18x1.5 |
DIN 3852 |
140 Nm |
60 Nm |
8 mm |
M22x1.5 |
DIN 3852 |
210 Nm |
80 Nm |
10 mm |
M33x2 |
DIN 3852 |
540 Nm |
225 Nm |
17 mm |
About Tansportation
Cooperation Partners
Contact us
Visen
Sales Manager
Product detail pictures:
Related Product Guide:
We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for Hot sale Rexroth A4vg71-1/2 - Rexroth Hydraulic Pump Parts A7VO Series Displacement 28~500 – RunFeng , The product will supply to all over the world, such as: Leicester, Sri Lanka, Slovakia, Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.
By Brook from Luxemburg - 2017.03.28 16:34
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Julia from Tanzania - 2018.07.26 16:51