Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Rexroth Gear Pump, Micro Gear Oil Pump, Danfoss Hydraulic Motor, If you are interested in any of our items, please don't hesitate to contact us and take the first step to build up a successful business relationship.

Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng Detail:

Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !

Application

Rexroth A4VG series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.

Product Information

Rexroth-Hydraulic-Pump-Parts-A4VG-5

ITEM	DESCRIPTION	QUANTITY	ITEM	DESCRIPTION	QUANTITY
1	VALVE PLATE L	1	8	SADDLE BEARING	2
1	VALVE PLATE R	1	9	BEARING SEAT	2
2	CYLINDER BLOCK	1	10	DRIVE SHAFT	1
3	RETAINER WASHER	1	11	CHARGE PUMP
4	BALL GUIDE	1
5	PISTON SHOE	9
6	RETAINER PLATE	1
7	SWASH PLATE	1

General Instructions

The pump A4VG is designed to be used in closed circuit.

The project planning, installation and commissioning of the axial piston unit requires the involvement of qualified person- nel.

Before using the axial piston unit, please read the corre- sponding instruction manual completely and thoroughly. If necessary, these can be requested from Bosch Rexroth.

During and shortly after operation, there is a risk of burns on the axial piston unit and especially on the solenoids. Take appropriate safety measures (e. g. by wearing protective clothing).

Depending on the operating conditions of the axial piston unit (operating pressure, fluid temperature), the characteris- tic may shift.

Service line ports:

The ports and fastening threads are designed for the speci- fied maximum pressure. The machine or system manufac- turer must ensure that the connecting elements and lines correspond to the specified application conditions (pres- sure, flow, hydraulic fluid, temperature) with the necessary safety factors.

The service line ports and function ports can only be used to accommodate hydraulic lines.

The data and notes contained herein must be adhered to.

The product is not approved as a component for the safety concept of a general machine according to ISO 13849.

The following tightening torques apply:

Fittings:

Observe the manufacturer’s instructions regarding the tightening torques of the fittings used.

Mounting bolts:

For mounting bolts with metric ISO thread according to DIN 13 or thread according to ASME B1.1, we recommend checking the tightening torque in individual cases in accor- dance with VDI 2230.

Female threads in the axial piston unit:

The maximum permissible tightening torques MG max are maximum values of the female threads and must not be exceeded. For values, see the following table.

Threaded plugs:

For the metallic threaded plugs supplied with the axial pis- ton unit, the required tightening torques of threaded plugs MV apply. For values, see the following table.

PortsStandard Size of thread		Maximum permissible tightening torque of the female threads MG max	Requiredtightening torque of the threaded plugs M 1) V	WAFhexagon socket of the threaded plugs
DIN 3852	M10 x 1	30 Nm	15 Nm2)	5 mm
	M12 x 1.5	50 Nm	25 Nm2)	6 mm
	M14 x 1.5	80 Nm	35 Nm	6 mm
	M16 x 1.5	100 Nm	50 Nm	8 mm
	M18 x 1.5	140 Nm	60 Nm	8 mm
	M22 x 1.5	210 Nm	80 Nm	10 mm
	M26 x 1.5	230 Nm	120 Nm	12 mm
	M33 x 2	540 Nm	225 Nm	17 mm
	M42 x 2	720 Nm	360 Nm	22 mm
	M48 x 2	900 Nm	400 Nm	24 mm

1) The tightening torques apply for screws in the “dry” state as received on delivery and in the “lightly oiled” state for installation.

2) In the “lightly oiled” state, the MV is reduced to 10 Nm for M10 x 1 and 17 Nm for M12 x 1.5.

About Tansportation

About Tansportation

Cooperation Partners

Cooperation Partners

Contact us
Visen
Sales Manager

Mobile Phone

+86 15698162885

Email

sales@rfhyd.com

+86 15698162885

Product detail pictures:

Related Product Guide:

We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng , The product will supply to all over the world, such as: Somalia, Philadelphia, Plymouth, Our company promises: reasonable prices, short production time and satisfactory after-sales service, we also welcome you to visit our factory at any time you want. Wish we have a pleasant and long terms business together!!!

Danfoss Omt