Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng
Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng Detail:
Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !
Application
Rexroth A4VG series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.
Product Information
|
ITEM |
DESCRIPTION |
QUANTITY |
ITEM |
DESCRIPTION |
QUANTITY |
|
1 |
VALVE PLATE L |
1 |
8 |
SADDLE BEARING |
2 |
|
VALVE PLATE R |
1 |
9 |
BEARING SEAT |
2 |
|
|
2 |
CYLINDER BLOCK |
1 |
10 |
DRIVE SHAFT |
1 |
|
3 |
RETAINER WASHER |
1 |
11 |
CHARGE PUMP |
|
|
4 |
BALL GUIDE |
1 |
|
|
|
|
5 |
PISTON SHOE |
9 |
|
|
|
|
6 |
RETAINER PLATE |
1 |
|
|
|
|
7 |
SWASH PLATE |
1 |
|
|
General Instructions
The pump A4VG is designed to be used in closed circuit.
The project planning, installation and commissioning of the axial piston unit requires the involvement of qualified person- nel.
Before using the axial piston unit, please read the corre- sponding instruction manual completely and thoroughly. If necessary, these can be requested from Bosch Rexroth.
During and shortly after operation, there is a risk of burns on the axial piston unit and especially on the solenoids. Take appropriate safety measures (e. g. by wearing protective clothing).
Depending on the operating conditions of the axial piston unit (operating pressure, fluid temperature), the characteris- tic may shift.
Service line ports:
The ports and fastening threads are designed for the speci- fied maximum pressure. The machine or system manufac- turer must ensure that the connecting elements and lines correspond to the specified application conditions (pres- sure, flow, hydraulic fluid, temperature) with the necessary safety factors.
The service line ports and function ports can only be used to accommodate hydraulic lines.
The data and notes contained herein must be adhered to.
The product is not approved as a component for the safety concept of a general machine according to ISO 13849.
The following tightening torques apply:
Fittings:
Observe the manufacturer’s instructions regarding the tightening torques of the fittings used.
Mounting bolts:
For mounting bolts with metric ISO thread according to DIN 13 or thread according to ASME B1.1, we recommend checking the tightening torque in individual cases in accor- dance with VDI 2230.
Female threads in the axial piston unit:
The maximum permissible tightening torques MG max are maximum values of the female threads and must not be exceeded. For values, see the following table.
Threaded plugs:
For the metallic threaded plugs supplied with the axial pis- ton unit, the required tightening torques of threaded plugs MV apply. For values, see the following table.
| PortsStandard Size of thread | Maximum permissible tightening torque of the female threads MG max | Requiredtightening torque of the threaded plugs M 1)
V |
WAFhexagon socket of the threaded plugs | |
| DIN 3852 | M10 x 1 | 30 Nm | 15 Nm2) | 5 mm |
| M12 x 1.5 | 50 Nm | 25 Nm2) | 6 mm | |
| M14 x 1.5 | 80 Nm | 35 Nm | 6 mm | |
| M16 x 1.5 | 100 Nm | 50 Nm | 8 mm | |
| M18 x 1.5 | 140 Nm | 60 Nm | 8 mm | |
| M22 x 1.5 | 210 Nm | 80 Nm | 10 mm | |
| M26 x 1.5 | 230 Nm | 120 Nm | 12 mm | |
| M33 x 2 | 540 Nm | 225 Nm | 17 mm | |
| M42 x 2 | 720 Nm | 360 Nm | 22 mm | |
| M48 x 2 | 900 Nm | 400 Nm | 24 mm | |
1) The tightening torques apply for screws in the “dry” state as received on delivery and in the “lightly oiled” state for installation.
2) In the “lightly oiled” state, the MV is reduced to 10 Nm for M10 x 1 and 17 Nm for M12 x 1.5.
About Tansportation
Cooperation Partners
Contact us
Peter
Sales Manager
Mobile Phone
+86 15698162885
sales@rfhydraulics.com
+86 15698162885
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Hot New Products Motor Parts - Rexroth Hydraulic Pump Parts A4VG Series Dispalcement 28~250 – RunFeng , The product will supply to all over the world, such as: Paraguay, Philadelphia, Greenland, There are advanced producing & processing equipment and skilled workers to ensure the merchandise with high quality. We've got found an excellent before-sale, sale, after-sale service to ensure the customers that could rest assured to make orders. Until now our merchandise are now moving on fast and very popular in South America, East Asia, the Middle east, Africa, etc.
By Dolores from UK - 2017.10.27 12:12
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Mag from Ghana - 2017.08.21 14:13
Products categories
-
Hot New Products Motor Parts - Linde Hydraulic...
-
Hot New Products Radial Piston Motor - Rexroth...
-
Hot sale Rexroth A4vg71-1/2 - Komatsu Hydrauli...
-
Factory Cheap Hot Rexroth A10vso - Linde Hydra...
-
2019 High quality Hydraulic Parts - Rexroth Hy...
-
Good quality Hpv102 Pistion Servo - Hitachi Hy...