Best quality Hydraulic Control Valve - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng
Best quality Hydraulic Control Valve - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng Detail:
Our factory has multiple brands REXROTH,HITACHI,SAUER DANFOSS etc.. hydraulic pump parts, pump, motor of good quality and reasonable price in stock, which can be delivered to customers in the first time .contact us to confirm more details !
Application
Rexroth A6V/A7V series Widely used in a variety of engineering machinery, plastic machinery, metallurgical machinery, pressing machinery and other large machinery.
Product Information
ITEM |
DESCRIPTION |
QUANTITY |
ITEM |
DESCRIPTION |
QUANTITY |
1 |
DRIVE SHAFT |
1 |
9 |
VALVE PLATE |
1 |
2 |
PISTON |
7 |
|
|
|
3 |
HALF RING |
2 |
|
|
|
4 |
CENTER PIN |
1 |
|
|
|
5 |
SET PLATE |
1 |
|
|
|
6 |
SOCKET BOLT |
14 |
|
|
|
7 |
DISC SPRING |
4 |
|
|
|
8 |
CYLINDER BLOCK |
|
|
|
Safety Information
The pump A7VO was designed for operation in open loop circuits
Systems design, installation and commissioning requires trained technicians or tradesmen.
All hydraulic ports can only be used for the fastening of hydraulic service lines.
During and shortly after operation of a pump the housing and especially a solenoid can be extremely hot, avoid being burned; take suitable safety measures (wear protective clothing).
Dependent on the operating conditions of the axial piston pump (operating pressure, fluid temperature) deviations in the perfor- mance curves can occur.
Pressure ports:
All materials and port threads are selected and designed in such a manner, that they can withstand the peak pressures.
The machine and system manufacturer must ensure, that all connecting elements and hydraulic lines are suitable for the actual operating conditions (pressures, flow, fluid, temperature) in accordance with the necessary safety factors.
All given data and information must be adhered to..
The product has not been released as a component in the safety concept of a total machine system acc. to DIN EN ISO 13849.
The following tightening torques are valid:
Female threads in the axial piston unit:
the maximum permissible tightening torques MGMax are maximum values for the female threads in the pump casting and may not be exceeded. For values see table below. -
Fittings:
please comply with the manufacturer‘s information regarding the max. permissible tightening torques for the used fittings.
Fastening bolts:
for fastening bolts to DIN 13 we recommend to check the permissible tightening torques in each individual case to VDI 2230.
Plugs:
for the metal plugs, supplied with the axial piston unit the following min. required tightening torques MV apply (see table)
Port thread size |
Max. perm. tightening torque in female threads MG max |
Required tightening torque of plugs or fittings MV |
Across the flats in Allan screws |
|
M14x1.5 |
DIN 3852 |
80 Nm |
35 Nm |
6 mm |
M18x1.5 |
DIN 3852 |
140 Nm |
60 Nm |
8 mm |
M22x1.5 |
DIN 3852 |
210 Nm |
80 Nm |
10 mm |
M33x2 |
DIN 3852 |
540 Nm |
225 Nm |
17 mm |
About Tansportation
Cooperation Partners
Contact us
Visen
Sales Manager
Mobile Phone
+86 15698162885
sales@rfhyd.com
+86 15698162885
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Best quality Hydraulic Control Valve - Rexroth Hydraulic Pump Parts A6VA7V Series Dispalcement 28~500 – RunFeng , The product will supply to all over the world, such as: Liverpool, Peru, Luxembourg, Many years of work experience, we have now realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
By Mignon from Bogota - 2017.02.28 14:19
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By lucia from Costa rica - 2018.05.15 10:52