A11VO Series Rexroth Pump Parts with Displacement 60~260
当社の工場には、REXROTH、HITACHI、SAUER DANFOSSなどの複数のブランドがあります。油圧ポンプの部品、ポンプ、モーターは高品質でリーズナブルな価格であり、初めてお客様に配送できます。詳細については、お問い合わせください。
There is our star parts A11VO Rexroth pump parts with displacement A11VO 60 till to A11VO 260 etc..油圧部品 is our main business in International trading which we guarantee 90 days quality control.Besides we also can offer the A11VO Pump Assembly directly.welcome send us inquiry and find technical support if you got problem.
応用
レックスロスA11VOシリーズが広く建設機械、プラスチック機械、冶金機械、機械を押すと他の大型機械の様々な使用します。
Short Introduction of a11vo
Rexroth has many products, mainly divided into A4VSO, A10VSO, A11VO, A2FM and other series, which are widely distributed in various industries. Among them, plunger pumps are more used in machine tool, metallurgy, forging, mining and other industries, and vane pumps are more Used in coal, metallurgy, chemical, environmental protection and other industries, gear pumps are mostly used in the transportation of petroleum, chemical, paint, dye, food, grease, medicine and other industries.
Rexroth A11VO series is a swash plate structure axial piston variable pump, mainly used for hydrostatic transmission in open circuit hydraulic systems, and designed for mobile working machinery applications.
商品情報
項目 |
DESCRIPTION |
量 |
項目 |
DESCRIPTION |
量 |
1 |
バルブプレート |
1 |
9 |
ベアリングシート |
2 |
2 |
シリンダーブロック |
1 |
10 |
DRIVE SAHFT |
1 |
3 |
BLOCK SPRING |
20 |
|
|
|
4 |
ボールガイド |
1 |
|
|
|
5 |
ピストンシュー |
9 |
|
|
|
6 |
リテーナープレート |
1 |
|
|
|
7 |
斜板 |
1 |
|
|
|
8 |
SADDLE BEARING |
2 |
|
|
一般的注意事項
A11VOポンプは、オープン回路で使用されるように設計されています。
プロジェクトの計画、アセンブリおよびアキシャルピストンユニットの試運転は、有資格者の関与を必要としています。
サービスラインポートと機能ポートだけ油圧ラインに対応するように設計されています。
中およびまもなく運転した後、アキシャルピストンユニット上、特にソレノイドに火傷の危険があります。 (例えば防護服を身に着けていることによって)適切な安全対策を行ってください。
アキシャルピストンユニット(操作圧力、流体温度)の動作状態に応じて、特性がシフトすることができます。
圧力ポート:
ポートおよび固定スレッドが指定された最大圧力のために設計されています。 機械またはシステムの製造業者は、接続要素と線が必要な安全因子と指定された動作条件(圧力、流量、作動油温度)に対応することを保証しなければなりません。
ここに含まれるデータおよびノートはに付着しなければなりません。
以下の締付けトルクが適用されます。
アキシャルピストンユニットのネジ穴。
最大許容締め付けトルクMG最大のねじ穴の最大値であり、超えてはなりません。 値については、次の表を参照してください。
継手:
使用済みの継手の締付けトルクについては、製造元の指示に従ってください。
固定ネジ:
DIN 13に応じてネジを固定するために、我々は、VDI 2230に従って個別に締め付けトルクを確認することをお勧めします。
ネジをロック:
アキシャルピストンユニットに付属のネジをロックする金属ため、固定ネジの必要な締め付けトルクが適用され、MV。 値については、次の表を参照してください。
製品は、DIN EN ISO 13849に基づいて、一般的な機械の安全コンセプトのためのコンポーネントとして承認されていません。
番手 |
マックス。 ねじ山MGmaxの許容締付トルク |
必要なネジをロックするための締付けトルクMV |
WAFの 六角ソケット |
|
M12x1.5 |
DIN 3852 |
50 Nmの |
25 Nmの |
6ミリメートル |
M14x1.5 |
DIN 3852 |
80 Nmの |
35 Nmの |
6ミリメートル |
M22x1.5 |
DIN 3852 |
210 Nmの |
80 Nmの |
10ミリメートル |
M26x1.5 |
DIN 3852 |
230 Nmの |
120nmで |
12ミリメートル |
M33x2 |
DIN 3852 |
540 Nmの |
310 Nmの |
17ミリメートル |
Common causes that may cause damage to A11VO oil pump:
1. The oil pump is not filled with oil before starting the oil pump
2. The liquid level in the fuel tank is too low (noise may often be heard at the oil suction pipe)
3. Add the filter to the suction port. The filter is blocked or not replaced for a long time, or the suction pipe is too thin. The negative pressure can be measured below -0.2bar at the suction port.
4. The oil viscosity is high, the speed is too high and the oil pump is often working at a large displacement, the negative pressure can be measured below -0.2bar at the oil suction port
5. The system oil particle pollution exceeds the standard and is wear-resistant particles
6. The oil pump works for a long time under low pressure (<10bar) and large displacement conditions
7. The case back pressure is too high (shaft seal leakage), the leakage pipe is too thin, a check valve with high back pressure is installed, or it is connected with other high back pressure pipelines
Tansportationについて
協力パートナー
お問い合わせ
Visen
セールスマネージャー
会社紹介
青島Runfeng油圧株式会社は、油圧部品の生産と国際貿易における10年以上の経験を持っています。 私たちは、生産のための最高品質の原材料を使用し、最高品質のアクセサリー利用できる世界的に提供しています。 我々は中国での油圧部品の信頼できるサプライヤーです。
ここで、あなただけの最高品質のアクセサリーを取得することはできませんが、また最高のサービスと長い保証期間を取得します。
絶妙な輸送包装、速い船積みサービス、高品質のアクセサリーは、私たちあなたのための最良の選択します。
製品のアプリケーション
エンジニアリング工場
油圧ポンプとなどショベル、ブルドーザー、ローラー、ドリル、ブルドーザー、重いショベル、道路ミキサーなどの機器のモーター
建設機械
油圧コンクリートポンプ車、コンクリートポンプ車輸送、コンクリートミキサー車、パイルドライバーや他の機器に、モータ等を、ポンプ。
産業機器
油圧ポンプと、ポリウレタン発泡機、セラミックプレス、プラスチック機械、化学装置、冶金機器などにモーター
航空出荷
曳航船のマシンを。 アンカークレーン、クレーン、浚渫船、浚渫血管などのオペレーティングシステムで船舶制御システムと油圧ポンプとモーターで使用されています。
パッケージについて